Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography - Ifsttar Accéder directement au contenu
Article Dans Une Revue International Journal of Solids and Structures Année : 2019

Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography

Résumé

Damage initiation is an important issue to understand the mechanical behavior of ceramic matrix composites. In the present work, a braided SiC/SiC composite tube was studied by FFT simulation tightly linked with micro-computed tomography (µCT) observations performed during an in situ uniaxial tensile test, which provide both the real microstructure, with a good description of local microstructural geometries, and location of cracks at the onset of damage. The FFT method was proven applicable to tubular structures and efficient to complete the large-scale simulation on a full resolution µCT scan (~6.7 billion voxels) within a short time. The edge effect due to the numerical periodic boundary conditions prescribed on the real and not rigorously periodic microstructure was quantified. The obtained stress field was compared to the cracks detected by the in situ µCT observations of the same composite tube. This one-to-one comparison showed that cracks preferentially initiated at tow interfaces, where sharp edges of macropores are mostly located and generate stress concentrations.
Fichier principal
Vignette du fichier
postprint_chen19_ijss.pdf (2.41 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-02010120 , version 1 (06-02-2019)

Identifiants

Citer

Yang Chen, Lionel Gélébart, Camille Chateau, Michel Bornert, Cédric Sauder, et al.. Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography. International Journal of Solids and Structures, 2019, 161, pp.111-126. ⟨10.1016/j.ijsolstr.2018.11.009⟩. ⟨hal-02010120⟩
139 Consultations
295 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More